Centrifugal Blower Extractor Fan Grain Crop Wood Chip 37kW WEG Electric Motor

  

Welcome to Current Electrical Services UK Ltd. All work & testing completed in house. Large Centrifugal Blower Fan produced by Woodcock & Wilson Ltd.

Suitable for a variety of uses including blowing, sucking and general air transfer. Equally this fan could be used for a large spray booth use as the motor is outside of the air flow. Originally the fan was being used to extract a type of natural gas fume. Although the motor is not flameproof/explosion proof - so it would not be suitable if the whole working environment required explosion protection.

Electric Motor: Quality WEG W22 37kW 2950RPM (2-Pole) 400/690v 65.8/38.1Amp 200L Frame. Flow rate: 2.5m3/s: (9000m3/h) (5297cfm).

Fan type: BLZ 630K 100-105. Inlet actual diameter airflow down to 300mm. Overall dimensions: (L)1800mm (H)1300 (Depth) 1120mm. These dimensions are the points furthest apart etc to give you an idea of the space required. Are welcome but they will need to be prearranged, and collection times will need to take place between 9.30am-4pm Monday-Friday. We do not offer weekend collections or out of office times. Please note they are only "estimated" & not guaranteed dates as sometimes we experience delays for a variety of reasons. Check your tracking for updates. Please note we have a few similar fans currently in stock, larger & slightly smaller. Please get in touch for info. We also have smaller spray booth fans, mainly 3-phase we deal in but we have the odd single phase from time to time. SORRY WE HAVE NO TECHNICAL SPEC RELATING TO THE CFM/AIR MOVEMENT THIS FAN CAN PRODUCE.