Description: Single suction and direct driven centrifugal fan Since the motor is attached to the side of the fan and with its forward curved impellers produces or the centrifugal fan operates under very high temperatures a very high air pressure of 1950m³. Characteristics: · Housing is made of electrostatic, powder-coated sheet steel. · Forward curved impellers are made of galvanized sheet steel. Can be adjusted with a speed controller.· The electrical terminal box is easily accessible. Technical drawing: see picture gallery POBRA 180-70 (2) 230 volts 1950 m³ / h Technical specifications: see picture gallery POBRA 180-70 (2) 230 volts 1950 m³ / h Material: Housing is made of electrostatic, powder-coated sheet steel. The forward curved impellers are made of galvanized sheet steel. ONLY WITH US, NOW NEW, WITH GERMAN ASSEMBLY AND OPERATING INSTRUCTIONS!!!!!!!
The SX-103 controller is designed for the rapid rotation of the fan of a heating boiler. It is equipped with a backlit voltage switch. The controller is also equipped with a potentiometer. The controller is secured with a fast 5A fuse.
Control / speed controller (phase cut) with max. 1000W load / 230V AC 50Hz. Please note that not all motors can be speed controlled. The starting current (not the same as the rated power of the motor) may not exceed the max.
Do not exceed load capacity. LCD display (current voltage at the output) Switch (on / off) Stepless adjustment via potentiometer Exchangeable fuse Temperature range -10C... 50C Dimensions: 65 x 38 x 85 mm Power supply line: 140cm Motor supply line: 90cm. All brand names, trademarks and registered trademarks are the property of their rightful owners and are only used here for description or the identification of the devices.Please refer to our obligation to take back batteries and accumulators. For more information, please refer to our terms and conditions (13). Voltage 230V / 50Hz +/- 10% Operating temperature -10 ° C - 50 ° C Length of the power line from the blower 1.50 m Length of the network cable 1.40 m Maximum output voltage 1000W Output 230V / 50Hz Dimensions (W x H x L) 65 x 36 x 85. Round flange adapter square / round pipe connection hose connection. You can use this adapter to connect a hose or pipe. You can combine the adapter with our centrifugal fans on the square air outlet side, and then connect a hose or pipe.
There are 4 matching holes on the square flange. Dimensions: 165 x 167 mm diameter 120 mm.
Please note that the fan may only be connected by an authorized specialist. Please note that the fan may only be connected by an authorized specialist!!
The company BNG SYSTEMS has set the bar in the industry and in the market more than industry has set the bar in the market with more than 40 years of international marketing experience and understanding of the industry by adding new models to production every day to make a better one Service to offer even higher. In this regard it supported nearly 300 sub-industrialists.
Since its inception, the company and product development has been able to build on customers' expectations and accelerate the research and development activities to adapt to the evolving technologies and market conditions. Duct fans Channel fan Supply fan exhaust wall fan duct fan ventilation pipe fan suction pipe fan window fan fan motor compact fan motor fan motor window wall pipe fan industrial fans centrifugal blower axial fan tube fan Radial Badventilator bathroom fan ceiling fan centrifugal fan centrifugal fan radial centrifugal wall window walls blower axial fan Axial fan window fan fan motor compact fan motor fan motor pipe fan industry Ablufventilator blowers Radial blowers axial fans Axial kitchen speed controller controller Radial fan Radial fan Radial fan Radial centrifugal fan Axial fans Fans Exhaust fan Exhaust fan Exhaust fan Wall fan Wall fan Wall fan Window fan Industrial fan Industrial fan Industrial fan Motor fan Centrifugal fan Suction fan Ventilation technology Room fan Heater Duct fan Centrifugal fanExtraction fan duct Room fan Roof fan Roof fan Extraction Extractor fan Extract air fan. Powered by BNG Ventilation Systems & House Product.
K1 Colour: Painted completely black. Controller: Product description: - The main potentiometer "MIN-MAX" Switch (on / off) Stepless adjustment via potentiometer Exchangeable fuse Temperature range -10C...
50C Dimensions: 65 x 38 x 85 mm Power supply line: 140cm Motor supply line: 90cm Voltage 230V / 50Hz +/- 10% Operating temperature -10 ° C - 50 ° C Length of the network cable 1.40 m Maximum output voltage 1000W Output 230V / 50Hz Dimensions (W x H x L) 65 x 36 x 85 Dimensions: 165 x 167 mm diameter 120 mm. This item is in the category "Business, Office & Industrial\HVAC & Refrigeration\HVAC & Refrigeration: Parts & Accessories\HVAC & Refrigeration: Fans & Blowers".
The seller is "bngsystems17" and is located in this country: DE. This item can be shipped to United Kingdom, European Union.